01925 225252

Single Firetex Pipe Penetration Seal System H120 Bulkhead

Certification

H120 Lloyds Register of Shipping, Certificate No. SAS F100052, blast over-pressure to 1.35 bar g, Lloyds Register of Shipping Certificate No. LWT 401087/1. (Approvals are also held through other Certifying Authorities, details of which are available upon request).

Insulation

Fireseal clips should be insulated to avoid ‘hot spots’. Pipework should be insulated to a minimum of 458mm from the face of the bulkhead.

Movement

Standard seal construction will accommodate +/-25mm in any plane.

Clipping

Each seal is supplied with fitting instructions, adhesive and stainless steel worm drive clips to suit pipe and sleeve diameters. For diameters of 350mm and above ‘double clipping’ is required. The clipping length or cuff (B) is 30mm for single clips and 70mm for double clips.

General

The bulkhead penetration featured here may also be applied to a deck penetration.

floor-deck-1